BB-S 500 FG Flush Grid Turning Modular Belt
BB-S 500 FG is a flush grid modular belt based on the SP-S 500 reference, designed for open-area conveying, cooling and draining applications including fruit & vegetable processing, meat & seafood processing and inclined product handling.
Flush Grid belt image
SP-S 500
Turning Belt
Flush Grid Modular Conveyor Belt for Turning Applications
BB-S 500 FG follows the SP-S 500 reference, combining an open-area flush grid surface with turning-belt construction for application-specific conveying.
BB-S 500 FG — Flush Grid
Open-area flush grid configuration for cooling, draining and turning-belt applications.
36% Open
Open-area design for cooling and draining
The SP-S 500 reference identifies an open-area belt for enhanced cooling and draining and notes suitability for direct food contact lines. The technical PDF identifies the belt as a flush grid turning belt.
BB-S 500 FG Reference Specifications
Specifications below are taken from the SP-S 500 product reference and linked technical PDF.
Product construction
SP-S 500 / BB-S 500 FG
Flush Grid
25 mm / 0.98″
11 mm / 0.43″
Ø5 mm / 0.19″
36%
PP / POM
Yes
Turning & sprocket reference
The SP-S 500 technical PDF identifies the product as a turning belt and provides sprocket and turning guidance.
12, 18, 24
2.2 × belt width
2.5 × belt width is stated as most optimal
Accessories shown on the product reference
BB-S 500 FG Features
The following points are based on the SP-S 500 reference page and technical PDF.
Open-Area Belt
The reference identifies an open-area belt for enhanced cooling and draining.
Direct Food Contact
The SP-S 500 product page states that the belt is suited for direct food contact lines.
Flush Grid Surface
The technical reference identifies the SP-S 500 as a flush grid belt with 36% open area.
Turning Belt
The technical PDF identifies SP-S 500 as a turning belt and provides turning-radius guidance.
PP / POM Options
The technical reference lists PP / POM as the material options; availability should be confirmed for the requirement.
25 mm Pitch
The technical reference lists a 25 mm / 0.98 inch pitch with a 5 mm rod diameter.
BB-S 500 FG Application Areas
The following applications are specifically listed on the SP-S 500 reference page.
Fruit & Vegetable Processing
Listed as an application for the SP-S 500 open-area belt.
Meat & Seafood Processing
Listed as an application for the SP-S 500 product.
Inclined Product Handling
Inclined product handling is specifically listed on the product reference page.
Food & Beverage / Packaging
The wider modular-belt product range lists these industries; confirm the exact conveyor requirement before selection.
Need Help Selecting BB-S 500 FG?
Send the actual belt and conveyor details so the required width, material, sprocket arrangement and turning configuration can be checked before ordering.
Send these details with your enquiry
You do not need to know the exact belt configuration before contacting us. A clear belt photograph and basic conveyor information can help identify the requirement.
Overall belt / conveyor width
Top and underside photograph if possible
What the conveyor carries
Operating conveyor speed
Water, washdown, oils or chemicals
Turning / curved conveyor arrangement
Send a BB-S 500 FG Enquiry
Have an existing belt or conveyor? Send the belt photograph, width and application by WhatsApp or email and we can review the requirement.
BB-S 500 FG Modular Conveyor Belt FAQs
What is BB-S 500 FG?
What is the pitch of the BB-S 500 FG belt?
What is the open area of BB-S 500 FG?
What material is available for BB-S 500 FG?
Is BB-S 500 FG suitable for turning conveyors?
What applications are listed for SP-S 500?
Ready to check your BB-S 500 FG requirement?
Send your belt photo, width and application by WhatsApp or email, or request a quote through our contact page.
Need the right BB-S 500 FG belt for your conveyor?
Share the belt photograph, conveyor width and application. Our team can help check the belt specification and supply requirement.